關於部落格
myconrods
  • 482

    累積人氣

  • 0

    今日人氣

    0

    訂閱人氣

High speed cylinder strengthen technology


In fact, a lot of polishing the intake and exhaust arena car essential modification projects, particularly for naturally aspirated engines, high angle camshaft after the facelift, although you can increase the output of high-speed rotation ductility, but if the intake and exhaust Poor road smoothness, it will affect the output efficiency, but for the average refit stores, it rarely carry out this project, simply because the project time consuming and complicated road must go through many procedures. In general, pre-construction must fully dismantle the cylinder head inside empty, especially valve guides, because the relationship between the location, you must dismantle the old valve guides, valve guides to avoid damage to the process, we must master the force of grinding avoid the intake and exhaust tract uneven surface phenomenon. Engine Parts

First, a preliminary designation polishing brush 40, as far as possible into the bending angle along the exhaust path designed by the original grinding, so as not to destroy the gas flow path and to the principle of gasoline and air in order to ensure full uniform mixed. According Tuner said a few hundred new brush asking about a few minutes to be replaced! Upon completion of the preliminary grinding, replace designation finer brush 80 will intake and exhaust channel surface do further processing, aftermarket auto parts this phase focuses on initial grinding when resurfacing, while slightly increased diameter intake and exhaust tract. After the surface of the intake and exhaust tract preliminary coarse particles after grinding nowhere to be seen, but it left the head scratches, this time into the exhaust tract diameter is slightly increased.

Overall, in addition to having such a large machine with stable quality than shorten working hours, especially in construction objects can be extended to more V8 cylinder head, exhaust header, exhaust turbo turtle or even inside the brake disc surface cooling ribs, etc. completely the airflow effect and efficiency. aftermarket engine parts Finally, the use of fluid abrasive materials and gas properties is quite similar, it is easy to impede air flow place for grinders is also the place most likely to hinder, the resistance of a nature increases the of abrasive sand and stay time, a long time the site has become more smooth and natural, the inner tube airflow obstruction point less and less.
相簿設定
標籤設定
相簿狀態